Makes it a cost effective solution to new Kitchen Sink Plumbing Parts -or replacing old pipes. These pipes are durable, lightweight, odor resistant and rust and easy to work. A drain of the kitchen sink consists of two parts: a straight tail piece, just below the drain and P-trap curve. The trap has water in its curve, maintaining sewer gases from escaping through the drain.
Look kitchen sink plumbing parts under the sink. You will see two hoses leading from the tap up to the water supply valves. What valves clockwise to turn off the water? Put under the sink. Screw the tail piece directly to the bottom of the drain. Slide the rubber washer and the jamb nut on the end of the tailpiece until flush with the bottom of the sink.
12 Photos Gallery of: Kitchen Sink Plumbing Parts
Insert the kitchen sink plumbing parts between the back and the inlet tube drains. You may have to loosen the jamb nut (step 2 above) to give the piece of tail game enough so you can slide the trap in place. Tighten the couplings by hand. If necessary, you can cut the tail piece with a saw if it is too long. Sand any rough edges with sandpaper medium grain.Tags : kitchen sink pipe models, pvc pipe under sink